I started working on another variation of the Edison lamps I’ve been building. Per a customer request this one will be about 36″ wide (I had been building them around 18″ wide so far). I wasn’t sure how it would look at first, but after the original dry fit I’m liking the proportions.

It is big enough though that I needed to use some of my standard stock (I like to build these out of leftover lumber or from some repurposed lumber). So no interesting lumber story to go along with this piece. I was however able to get all of the pieces out of one piece of lumber. It may not sound like a big deal, but by getting all of the lumber from one board I don’t really have to worry about the cherry matching in tone. Prior to planing the box pieces to thickness, I was able to resaw the stock for the 1/4″ thick top. This resulted in the box pieces being a fraction of an inch thinner than I usually build, but it definitely doesn’t ruin the look (it actually gives me some more options when it comes to the dovetails).

In the 2 photos below you can see my initial dry fit and all of the pieces awaiting the initial glue-up. I should be sanding up and working on the wiring on the next shop trip.